KWIK RE1000-PRO is a Pure Epoxy based chemical designed especially for the Construction Industry. Few applications including anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (normal, porous & light) as well as solid masonry. KWIK RE1000-PRO being pure epoxy resin based mortar is used in rotary hammer drilled & diamond core drilled holes and are suitable for extreme loads & with high embedment depths. It has very high bond strength to concrete failure, thus making it suitable for very smooth climate conditions. Ideally suited for high load applications, the resulting bond is stronger than the base material itself and as the system is based on adhesion principle, no additional load stress is imparted to the base material as with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre and group anchoring and use in concrete of unknown quality or low compressive strength. Installation temperature of KWIK RE1000-PRO from +5Â°C and a service temperature up to 72Â°C and has high chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt). The product is supported with many international approvals which prove it's capability in nearly every application.